BOXLIGHT ProjectoWrite5 Manual do Utilizador descarregar pdf (Página 52)

EZ Suite(Setting&Configuration)

SSID (Service Set Identification): The same name of SSID must be assigned to wireless

devices in your network. Considering your wireless

network security, the default SSID is set to be “rtwap”.

Security: you can configure the security settings of your wireless network.

There are three wireless security modes supported by the Router: Open, WPA2

and WPA.

Open – it means no security settings of this wireless network.

The default setting is automatic that based on the wireless station's capability

and request.

WPA (default) and WPA2 – It‟s the WPA/WPA2 authentication type.

PSK (Pass-Key): You can enter a key-code.

Channel: This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference

problems with another nearby access point.

Auto: The default setting is automatic, which can adjust the channel width for your

clients automatically.

V : press the ENTER button to enable AP mode, then press the ESC button on the

remote control to quit AP mode setting page.

X: abort the setting, or you can press the ESC button on the remote control to quit setting.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 98 99

Sem comentários

BOXLIGHT ProjectoWrite5 Manual do Utilizador Página 52